• Make sure that the network device works normally.

  • Log in to the ZXA10 C220 through HyperTerminal or Telnet.

  • Context:

    To configure the system log, perform the following steps:

    Step-1. Use the configure terminal command to enter global configuration mode.
    Step-2. Use the syslog-server host command to configure system log server.
    Step-3. Use the logging on command to enable system log function.
    Step-4. Use the logging buffer command to configure log buffer size.
    Step-5. Use the logging console command to configure information level sent to console.
    Step-6. Use the logging level command to configure information level of log file.
    Step-7. Use the logging mode command to configure clear mode of log buffer.
    Step-8. Use the logging snmplog-save enable command to enable the function of saving SNMP log to buffer.
    Step-9. Use the show logging configure command to query log configuration.

    - See more at: http://gponsolution.com/zte-olt-system-log-configure.html#sthash.TqWaFDRq.dpuf


    中兴OLT系统 Log 设置示例:

    Configure log server:

  • Log server IP address:

  • Log type: alarm log, command log, and SNMP log

  • Log function: On

  • Console log level: Notification

  • ZXAN#configure terminal
    Enter configuration commands, one per line. End with CTRL/Z.
    ZXAN(config)#syslog-server host fport 514 lport 514 alarmlog
    level notifications cmdlog snmplog get-pdu set-pdu
    ZXAN(config)#logging console NOTIFICATIONS
    ZXAN(config)#logging on

    ZXAN#show logging configure
    logging on
    logging buffer 200
    logging mode fullcycle
    logging console notifications
    logging level notifications
    logging snmplog-save disable
    syslog facility local0
    syslog severity 6
    syslog-server host fport 514 lport 514 alarmlog level notifications cmdlog snmplog get-pdu set-pdu

    - See more at: http://gponsolution.com/zte-olt-system-log-configure.html#sthash.TqWaFDRq.dpuf


  • English